Electric multiple unit, Pullman IIm, RhB ABe 4/4 III, No. 53, Tirano, red, Ep VI

• Structure and frame made of weather-resistant plastic
• Multicolored interior
• Multicolored driver's cab with driver figure
• Separately applied grab bars and steps
• 2 Bühler motors
• Ball-bearing axles
• Drive on four axles
• LokSound 5 XL decoder for DCC, Motorola, M4, and Selectrix operation
• Independent registration at central units with RailComPlus or mfx functionality
• PowerPack storage capacitor for uninterrupted power supply
• 50mm speaker with large sound capsule for the highest sound enjoyment
• Digitally liftable and lowerable roof pantographs with ESU servos
• Digitized original sounds
• Sensor-controlled sounds during curve travel
• Direction-dependent light change 3+1 with warm white LEDs, train-side headlight signal can be switched off
• Direction-dependent light change 3+1 with warm white LEDs for operation in double traction, front lights on each side can be switched off separately
• Driver's cab and passenger compartment lighting can be switched separately
• Brake sparks when braking
• Minimum radius = 600 mm
• Length over buffers = approx. 690 mm

The weather-resistant Pullman model features all prototype-specific details and is manufactured as a handcrafted model in a plastic and metal mixed construction. The end grab bars and hose couplings consist of individually applied parts and are factory-mounted. The multiple units are produced slightly shorter than the prototype to enable operation on all commercially available track radii (from 600 mm). The structure receives a durable paint finish for an even more prototype-like appearance. Paintwork and lettering correspond to the respective construction states. The multi-part and multicolored driver's cabs and passenger compartments are atmospherically illuminated by warm white LEDs. Of course, you can also switch all prototype-specific headlight signals in digital operation.
The roof pantographs made of metal are smoothly raised and lowered by high-quality ESU servos, accompanied by original sound. The height to which the pantographs should extend can be set digitally.
Each of the two bogies is powered by a powerful seven-pole Bühler motor, which transmits its power wear-free to both axles of the bogies via ball-bearing shafts. The axles carry wheels made of stainless steel and are also guided in ball bearings. A three-point suspension of the bogies ensures constant contact of all wheels with the track, thus guaranteeing a consistently safe power pickup.
Nevertheless, the ESU LokSound 5 XL digital decoder is factory-equipped with a "PowerPack" energy storage device, which ensures a consistently safe power supply even on the dirtiest tracks in the garden. The digital equipment with several new acoustic functions in the garden railway sector allows you to experience your layout in a completely new way. The powerful original sound is emitted to the outside world by a large 50mm speaker with a sound capsule.
Novel sensors allow for speed-dependent squeaking sounds in curves. At the ends, the multiple unit features LGB-compatible couplings.