Diesel locomotive V200 010 of the DB, red, Era III, Sound+Smoke, DC/AC

• First time at ESU Era-III locomotive with DB logo instead of lettering
• Body and frame made of metal
• Perforated fan grilles in the roof area, flat MaK "V" on the end faces
• Multicolored cab with driver figure
• Prototype-accurate partial visibility through the engine room
• Multi-part bogie covers, silk-matt painted wheelsets
• Separately applied handrails and steps
• Coupling in a guide NEM pocket
• Five-pole ESU motor with two flywheels
• Drive via cardan/screw gearbox on three axles, two traction tires
• LokSound V4.0 M4 decoder for DCC, Motorola®, M4, and Selectrix operation
• Independent registration at central units with RailComPlus® or mfx® functionality
• PowerPack storage capacitor for uninterrupted power supply
• 2 large speakers with large sound capsules for the highest sound enjoyment
• Universal electronics with plug slider for switching between two-rail and center-rail operation
• 2 smoke generators, synchronized with LokSound, only one smoke generator is active during shunting
• Digitized original sounds of a V200 locomotive with Maybach diesel engines MD 650
• Sensor-controlled sounds during slow curve travel
• Direction-dependent light change, train-side front signal can be switched off, shunting, cab, driver desk, and engine room lighting
• Brake sparks during hard braking
• Pipette for filling the smoke generator, buffer beam accessories and 2nd coupling included
• Minimum radius = 360 mm
• Length over buffers = 209.7 mm